 |
||||||
|
|
|
 |
|
|
|
Designed for remote capsules and compact microphone use, the XY/MS mount will accept 19/20mm or 21/22mm diameter microphones. It uses an accurate reference pin location system,
with preset 120°, 105°, 90°, 70° or 0° (MS) inter-capsule angles, while maintaining true vertical coincidence.
Lightweight, small swivel with ratchet lever handle and a brass 3/8” Whitworth1 female thread for pole mounting.
A lightweight plastic handle, with ratchet lever handle and brass 3/8” Whitworth1 female thread in base and slot for XLR connector moulded inside.
The Multimount V2 replaces Rycotes previous multimount design. It allows the user to shockmount a microphone to a camera via the accessory-shoe (usually a hot-shoe), additionally a 3/8" Whitworth1 (or BSW) female thread is provided in the base (rectangular section) of the Multimount for direct attachment to boom poles, microphone stands or clamps with a similar 3/8" tip. Note: The Multimount v2 now uses 2 thumb wheels, instead of one as shown in the product image Three sizes of Multimount V2 are available:
The CCAv2 has replaced the Softie mount & Boom adaptor to offer greater versatility.
The CCAv2 can be used as a conventional Boom Adaptor fitted on the end of a boom or fish pole. The CCAv2 has a brass 3/8" Whitworth1 (or BSW) female thread insert for fitting to the pole. The design of the CCA also allows for the XLR connector to be
anchored using the supplied Velcro grip.
The Softie CCAv2 allows you to attach your shotgun microphone to camcorders fitted with a microphone clamp (25-27mm diameter). The Softie mount provides isolation against lens motor noise and general handling noise. Suitable for: Sony HDR-Z1E, Canon XL1 & XL2 and many more.
Three sizes of the Softie CCAv2 are available:
Hot Shoe Extension
The length of the bar is 100mm (4.00") and weighs 50g (1.7oz) and is suitable for male flash shoe accessories.
Extension Handle The Extension Handle has a 3/8"1 male threaded stud which fits all standard microphone mounts with 3/8" thread insert. The Extension handle is simply screwed
onto the mount, and the soft feel foam gives a comfortable ligh Suitable for the following & more:
The base of the Extension handle has a 3/8"1 female thread to allow easy fitting onto
The Hot Shoe 3/8" adaptor is a stud with twin thumb nuts (one to lock shoe and one to lock accessory) providing nominal 8mm thread length for accessory attachment.
Note: For all practical sound recording purposes 3/8" BSW (or Whitworth) can be
considered to be interchangeable with 3/8" UNC (American Unified National Coarse) threads. |
The Connbox can be fitted to the Modular Suspension to isolate and eradicate cable-borne noise. The Connbox acts as
a transition connector and anchor point for the microphone tail. Available in mono or stereo it has a flexible starquad output cable that terminates in a 3 (or 5) pin XLR at the
pistol grip. The input cable is an ultra-thin pluggable tail fitted with either a Lemo connector (Schoeps CCM) or an XLR socket that has a special locking ring to prevent rattle. The
cable needs no special dressing or positioning – just plug and go. 
The new XLR Holder is one of the simplest and most useful little
products you’ll ever come across, solving the eternal problem of how to attach your XLR connectors when using a boom pole or mic stand. Manufactured from flexible Hytrel™, the holder
provides a quick, noise free, reliable clamp for the XLR. The boom fixing has a custom hexagonal core to mate with the Rycote Boom Adaptor – so you set the rotational location of the clamp
precisely. If you’re not using a Rycote adaptor, no problem, just turn the Holder over and it still provides a firm fitting between the pole and mount.
Boom Pole Configuration
Camcorder Configuration
The Hot Shoe Extension allows you to fit multiple
attachments to your single hot shoe on your camera/camcorder. The Hot shoe Extension allows you to rotate the attachment 360° around the shoe fixture on the camera.
tweight hand grip.
Hot Shoe Adaptor |
|
 |
|
|
| [LTF Home] [Products] [Contact Us] [Wanted] |
|
|