|
DXA-6
Now, an XLR adaptor & phantom power unit in one compact device. Has all the great features of our popular DXA-4 adaptors with the addition of 48volt phantom power on both channels. Works with any stereo camcorder.
The DXA-6 Dual Phantom Power Adaptor allows you to attach two balanced XLR audio devices to your camcorder. Each input signal is sent to a MIC/LINE switch to allow you to set the proper level,
then to an audio control to adjust attenuation.
The balanced input signal is then converted to an unbalanced output through an impedance matching transformer. Finally, the output signal is sent through an attached shi elded cable terminating in a stereo mini-plug that connects to your
camcorder’s microphone jack. When the phantom power is activated, the DXA-6 supplies 48volts to power condenser microphones attached to either XLR input.
The auxiliary input allows you to attach wireless microphones that use standard mini-jack connectors. This signal is sent to the right channel. A switch lets you
select between stereo or mono operation. For stereo operation, the adaptor sends the left input signal to track 1 left and the right input signal to track 1 right on the
DV tape. The two channels are never mixed during recording allowing you to control both channels during editing for maximum versatility. For mono operation, both
channels are mixed together - ideal when using only one audio source to give you two channel recording.
Features
- Two Balanced XLR Inputs for Stereo Recording
- Dual 48volt Phantom Power Supplies for Professional Mics
- Auxiliary Mini-Jack on Right Channel for Wireless Mics
- Dual MIC/LINE Level Switches for Versatility
- Dual Drift Free Trim Controls for Reliable Operation
- MONO/STEREO Switch for Single Input Recording
- Low Noise Transformers for Superb Sound
- Uses One Standard 9volt Battery
- LED Battery Power Indicator
Specifications
|
Input:
|
Two transformer balanced XLR connectors Auxiliary unbalanced mini-jack for right input
|
|
Output:
|
Unbalanced stereo right angle mini-plug
|
|
Input Level:
|
MIC setting: -60dBu LINE setting: -10dBu
|
|
Output Level:
|
Mic level
|
|
Attenuator:
|
Adjustable from unity to zero output in 10 steps
|
|
Phantom Power:
|
Dual regulated 48volt power supplies Current to 14mA (direct short)
|
|
Battery Type:
|
One standard 9volt alkaline battery LED battery indicator
|
|
Battery Duration:
|
4hours continuous use - typical
|
|
Case:
|
Aluminium
|
|
Case Finish:
|
Flat black
|
|
Dimensions:
|
133mm L x 89mm W x 32mm H (5.25" L x 3.5" W x 1.25" H)
|
|
Weight:
|
455gm (16oz)
|
Download DXA-6 Instructions . . . (.pdf) Download DXA-6 Brochure . . . (.pdf)
|