BeachTek DXA-10

Now Obsolete

DXA-10 2-Channel Microphone Preamplifier

BeachTek DXA-10 2-Channel Microphone PreamplifierThe DXA-10 is a professional two channel, battery-powered microphone preamplifier with built-in phantom power. It easily connects balanced XLR microphones to consumer audio recording gear. Ideal for use as a very quiet front end for camcorders such as the Canon XL1s and Sony FX1, and also MiniDisc recorders or any other device that lets you use line level inputs directly. The line level inputs bypass the normally poor quality preamps in the recorder for far superior audio quality.

BeachTek DXA-10 with Belt clipThe DXA-10 has both LINE and MIC level outputs for versatility. It features studio quality audio and professional +/-15 volt rails for lots of headroom. The slideout drawer makes battery replacement a snap. Rugged construction ensures years of use and the removable belt clip makes it perfect for portable applications where no-compromise sound is required.

DXA-10 Features

  • Two balanced XLR microphone inputs
  • Two line level RCA outputs
  • Mic level stereo mini-jack output
  • Dual low noise preamps with +/-15 volt rails for plenty of headroom
  • High / Low gain settings for dynamic and condenser type microphones
  • 20 Hz to 20 kHz audio bandwidth
  • Dual switchable 48 volt phantom power for condenser microphones
  • Easily replaceable 9 volt battery
  • LED battery indicator
  • Removable belt clip for easy portability
  • Sturdy extruded aluminum chassis
  • Superb sound

Please note that this item is now obsolete.

Specifications

Gain:

Switchable: HI (60dB); LO (30dB)

Frequency Response:

20Hz to 20KHz, -1dB

THD + Noise:

Less than 0.03 @ 1kHZ

Signal-To-Noise Ratio:

90db @ -10dBV output

Maximum Output Level:

+18dBu (RCA output) -37dBu (MIC output)

Phantom Power:

Dual regulated 48 volt power supplies. Current to 14mA (direct short)

Battery Type/Duration:

One standard 9 volt alkaline battery
4 hours typical (no phantom)

Current Draw:

120mA (no phantom)

Case:

Powder coated aluminum

Dimensions:

134mm L x 89mm W x 32mm H (5.25" L x 3.5" W x 1.25" H)

Weight:

400gm (14 oz).

BeachTek DXA-10 Front/Rear Panels

[LTF Home] [Products] [Contact Us] [Wanted]

©2004-2007 Location Technical Facilities Ltd.
64 Oxford Road, New Denham, Uxbridge, UB9 4DN, England. VAT No. GB 341 0377 89